INTEL NETSTRUCTURE 7110 E-COMMERCE ACCELERATOR CERTIFICATE INSTALLATION
SSL CSR FOR INTEL NETSTRUCTURE 7110
1. Once you receive your certificate, you will need to unzip it. Then, you will upload it to the 7110.
2. Be sure you import the site certificate and the intermediate CA certificate. These two files must be combined into one. To do this, select the import cert command to import the chained certificates.
3. Then, be sure to paste the server’s site certificate before the intermediate certicate. Then, follow the Intermediate CA certificate by entering in three periods on a new line. For example:
Intel 7110> import cert webserver
keyid is webserver;
Import protocol: paste, xmodem, uudecode
[paste]: < Enter>
Type or paste in date, end with ... alone on line
-----BEGIN CERTIFICATE-----
MIIFZTCCBM6gAwIBAgIQCTN2wvQH2CK+rgZKcTrNBzANBgkq
…………..more text…………
Fw0wMDExMTAyMzU5NTlaMIHHMQswCQYDVQQGEwJVUzETMBEG
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
MIIEMTCCA5qgAwIBAgIQI2yXHivGDQv5dGDe8QjDwzANBgkq
…………..more text…………
m8hDjswMKNXRjM1GUOMxlmaSESQeSltLZl5lVR5fN5qu
-----END CERTIFICATE-----
< Enter>
...< Enter>
Import successful!
Intel 7110>
TIP: Make sure there is no white space in between, in front of, or behind the certificates and the “Begin and End” headers.
4. Next, create the mapping for Server 1 by using the create map command to choose the server IP address, ports, and keyID.
Intel 7110> create map
Server IP (or 0.0.0.0): 10.1.1.30
SSL (network) port [443]: < Enter>
Cleartext (server) port [80]: < Enter>
KeyID to use for mapping: webserver
5. Lastly, Save the configuration after the server is mapped.
Intel7110> config save
Saving configuration to flash...
Configuration saved to flash
Intel 7110>
SSL CSR FOR INTEL NETSTRUCTURE 7110
Back To Guides